[rtg] Strange problem with 0.7.4

[Tony Faoro]

I am experiencing the same problem. I have two identical switches 
(3750s). I have two separate customers on port 3 of each switch. Their 
inbound traffic is being displayed normally however outbound is identical.

Here is the info from targets.cfg:

6.295.208.2    .1.3.6.1.2.1.2.2.1.10.10103     32      string  
ifInOctets_4    34      36000000000      (GigabitEthernet1/0/3)
6.295.208.2    .1.3.6.1.2.1.2.2.1.11.10103     32      string  
ifInUcastPkts_4 34      36000000000      (GigabitEthernet1/0/3)
6.295.208.2    .1.3.6.1.2.1.2.2.1.16.10103     32      string  
ifOutOctets_4   34      36000000000      (GigabitEthernet1/0/3)
6.295.208.2    .1.3.6.1.2.1.2.2.1.17.10103     32      string  
ifOutUcastPkts_4        34      36000000000      (GigabitEthernet1/0/3)

This one is working properly and was the first added.

6.295.208.3    .1.3.6.1.2.1.2.2.1.10.10103     32      string  
ifInOctets_5    36      36000000000      (GigabitEthernet1/0/3)
6.295.208.3    .1.3.6.1.2.1.2.2.1.11.10103     32      string  
ifInUcastPkts_5 36      36000000000      (GigabitEthernet1/0/3)
6.295.208.3    .1.3.6.1.2.1.2.2.1.16.10103     32      string  
ifOutOctets_5   36      36000000000      (GigabitEthernet1/0/3)
6.295.208.3    .1.3.6.1.2.1.2.2.1.17.10103     32      string  
ifOutUcastPkts_5        36      36000000000      (GigabitEthernet1/0/3)

This one shows the same outbound traffic as the first (i.e. it's broken)

Is RTG getting confused with the MIBs being exactly the same?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://gizmo.fireflynetworks.com/pipermail/rtg/attachments/20060711/fd457fe0/attachment.htm